Cleaning and etching your concrete: using the Etch N Clean solution. What you need: •Stiff bristle broom •Water supply •High pressure hose •Bucket (2 or more gallon capacity) •Watering can or garden sprayer •Scraper The first step of preparation is to scrape off any buildup of debris such as paint, drywall mud and dirt. The second step is to sweep away all the loose debris, dirt and dust from the concrete. Using a Shop-Vac to clean around all the baseboards, pits and divots will ensure removal of all loose contaminants before applying the etch n clean. IMPORTANT FACTS: Etching is a critical part of the process. All concrete floors require preparation before applying any coatings. By using the etch n clean solution, you will be removing such things as oil and other contaminants. This also profiles the concrete so the coating has something to sink into. This ensures adhesion of your epoxy coating and prevents peel ups. The third step is to mix the etch n clean solution with 1 gallon of warm water in a two gallon bucket. You then transfer the mixed solution, preferably in a watering can or garden sprayer to spread the solution evenly of the surface of your preparation area. If you dont have the aforementioned, you can apply the mixed solution from the bucket by spreading it out in small ribbons to cover the preparation area. After dispersing the solution, use a stiff bristle broom to scrub the etch n clean over the concrete. Aggressively use the broom over any stubborn ...
No comments:
Post a Comment